Skip to content
‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎ G‎‏‏‎‎‏‏oing to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV‎‏‏‎‏‏‎‏‏‏‎
‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days ‏‏‎ Going to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV
Warranty Shipping Contact
September 6, 2023

EXPERIENCED TECH USES NEW AIR-HAMMER POWERED FUEL INJECTOR REMOVAL KIT TO QUICKLY POP FORD 6.7L POWER STROKE INJECTORS

EXPERIENCED TECH USES NEW AIR-HAMMER POWERED FUEL INJECTOR REMOVAL KIT TO QUICKLY POP FORD 6.7L POWER STROKE INJECTORS

With more than 45 years of experience as a technician, Brian Dull has pulled more than his fair share of stubborn fuel injectors. When he had a 2017 Ford F-250 come into the shop with a bad high pressure fuel pump, he knew he would have to remove the 6.7L Power Stroke’s stuck fuel injector first.

It was time to test out his new ProMAXX Tool Ford 6.7L Power Stroke air hammer-powered Fuel Injector Puller (PMXPWP200PROP). A GM 6.6L Duramax version is also available (PMXPWP220PROP).

“Ford has its own version of a fuel injector puller, but the ProMAXX one works faster and better,” Brian said. “After taking everything apart to get at it, the Ford puller takes at least 10 minutes to set up and up to a half hour to get a stuck injector out.”

It is the fastest…“Using the ProMAXX puller, you don’t have to fasten a millimeter bolt in the mounting hole,” Brian said. “I slipped the lift kit on tight and popped out the injector in less than five minutes.”

The ProMAXX fuel injector puller lift kit does not require unnecessary time bolting and unbolting from the cylinder head. It is precision machined to fit the injector and not cast. The snug fit prevents walking off the injector and lost pulling power.

Most importantly, the 11-inch air hammer powered punch uses the force and vibration of an air hammer to concentrate pulling power. No back-and-forth motion is required. A powerful slide hammer is also included in the ProKit and ProKit Plus versions.

“I was able to mount the lift kit and sneak in through the wheel well to quickly pull it out,” Brian said. “If you don’t use the right tool, you can damage the injector. This is the right tool, and I’d recommend it to other techs to help them beat book times.”

SEE TECH POP FORD 6.7L POWER STROKE FUEL INJECTOR WITH AIR HAMMER POWER!

Brian Dull, Certified Sr. Master Technician, uses the ProMAXX Tool air hammer-powered fuel injector puller for the Ford Power Stroke 6.7L. The NEW PowerPull™ Fuel Injector Puller Base Kit (PMXPWP200BSE) and ProKit Plus (PMXPWP200PROP) are engineered to accommodate and utilize an air-hammer powered punch for quick removal of tough injectors and virtually eliminating cylinder head removal. The integration of an air-hammer-powered punch into the Ford 6.7L Power Stroke Fuel Injector Puller is a true game changer in fuel injector removal technology. This innovative addition, with its sheer force and precision, ushers in a new era of efficiency and power by concentrating the force and harmonic vibration of the air hammer to shock the fuel injector loose.

CHECK OUT FUEL INJECTOR PULLER KITS MORE

FORD 6.7L FUEL INJECTOR PULLER KIT

GM 6.6L FUEL INJECTOR PULLER KIT

FORD 6.7L FUEL INJECTOR SEAT REPAIR

EXHAUST MANIFOLD BOLT REPAIR KIT

Filed in: Ford Repair Kits, Power Stroke Repair Kits, Pull-Fuel-Injectors-Oil-Tubes-Seals
Previous article HOW TO MAKE A BROKEN BOLT REPAIR IN 25 MINUTES ON FLEET VEHICLES USING ADAPTABLE STUD REPAIR KIT
Next article NEW AIR-HAMMER-POWERED FUEL INJECTOR PULLER KITS SHORTEN REPAIR TIMES ON FORD 6.7L POWER STROKE AND GM DURAMAX 6.6L INJECTORS

NEW AT PROMAXX

  • STC71000-12mm-14mm-hold-A-Rotor_Combo
    STC71000-12mm-hold-A-Rotor_in-use

    Hold-A-Rotor and Secure Disc Brake Rotors in Place on 12mm & 14mm Studded Hubs - STC71000

    Part#: STC71000
    $19.99 - $19.99
    $19.99
    $19.99 - $19.99
    $19.99

    $19.99 - $19.99
    $19.99
    $19.99 - $19.99
    $19.99
  • SAVE: 13% SAVE: %
    Mounting Ford F-150 Rear Axle Repair Kit
    FordF-150AxleRepairToolKit-PMXFRA500PRO

    Ford F-150 Rear Axle Repair Kit For 2021–2023 Trucks w/ Trailer Tow Max Duty Package & 9.75-inch Heavy-Duty Axle

    Part#: PMXFRA500PRO
    $399.95
    $399.95 - $399.95
    $399.95
    $349.95
    $349.95 - $349.95
    $349.95

    $399.95
    $399.95 - $399.95
    $399.95
    $349.95
    $349.95 - $349.95
    $349.95
    SAVE: 13% SAVE: %
  • Ford Explorer SAFETY RECALL 22S27-SB 204-594 Forcing Screw Replacement
    204-594 Forcing Screw Replacement

    Forcing Screw Alternative to Ford 2020-2022 Explorer Recall Special Service Tool part# 204-594 "Thunderbolt"

    Part#: PMX204-594
    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95

    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95
  • SAVE: 25% SAVE: %
    Fuel Injector Seal Puller (PMXISP200A)
    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller

    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit

    Part#: PMXISPS200BSE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95

    Fuel Injector Seal Puller/Saver ProKit Part #: PMXISPS200PRO Introducing the cutting-edge Ford Power Stroke 6.7L Fuel Injector Copper Compression S...

    VIEW MORE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95
    SAVE: 25% SAVE: %
  • Ford-6.7L-Power-Stroke-EGR-Tube-Broken-Bolt-ProKit

    Ford 6.7L Power Stroke Diesel EGR Tube Broken Bolt Repair Kit - Nino

    Part#: PMXN200PRO
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95

    Nino EGR Tube ProKit Part #: PMXN200PRO 6.7L Ford Power Stroke Diesel Exhaust Gas Recirculation EGR Repair Kit - Nino The ProMAXX® EGR (Nino™) repa...

    VIEW MORE
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95

SHIPPING INFO

For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today
724-941-0941

Promaxx Tool Address

1121 Boyce Road
Suite #2000
Pittsburgh, PA 15241

Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.