Skip to content
‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎ G‎‏‏‎‎‏‏oing to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV‎‏‏‎‏‏‎‏‏‏‎
‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days ‏‏‎ Going to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV
Warranty Shipping Contact
January 3, 2024

Vehicle Service Pros Tool Review: ProMAXX Tool Ford 6.7l Power Stroke Fuel Injector Removal Kit

Fuel Injector Puller Blog

Content brought to you by PTEN AND VSP.

REVIEWED BY RANDY KAISER, SERVICE MANAGER AT ROST MOTOR, INC. IN MANSON, IOWA

Q: How did the Ford 6.7L Power Stroke Air-Assisted Fuel Injector Puller (PMXPWP200PROP) function as far as saving you time?

A: This is a very unique tool, and a pretty good time saver. Instead of bolting down a traditional injector remover, you slip a button into the opening, position the remover, and snug it up to the injector. Then you slip the other part of the tool into your air hammer and let it do the work for you.

Q: What kind of setup was involved before using the product?

A:There is no setup involved. You simply take the tool out of the box and put it to work.

Q: How easy was it to use?

A:It’s actually very easy to use. Once you position the button in the opening, you simply slide the injector remover into place and snug it up to the injector. Then you insert the supplied air hammer punch into the air hammer, and rattle the injector loose.

Q: How was its packaging? Did it come with any accessories?

A:The packaging is actually very nice. It comes in a very sturdy cardboard box that will easily fit into a toolbox drawer. There are no accessories included, just the components of the tool.

Q: Was there a manual included? If so, did you use the manual and was the manual easy to understand?

A:There was no manual included. There was a one-page instruction sheet with pictures that does a good job of explaining how to use the tool.

Q: What features did you like?

A:I like that you don’t have to fasten it down to use it. You just slip it into place. This makes it much quicker to use. Then after you have it in place, the air hammer does all of the work for you.

WATCH THE FUEL INJECTOR PULLER

Q: Is there any way you could think to improve or add to this tool?

A:The button that you put in first is not overly big and sometimes gets a little slippery with oily hands. It could also possibly be dropped and lost. It might be a good idea to include a spare button with the kit.

Q: What types of jobs/repairs did you use this tool for?

A:I used it to remove injectors on a Ford 6.7L Diesel engine.

Q: How does this tool compare to other tools you've worked with?

A:I have used other injector pullers, but never one that was designed to be used with an air hammer. This feature makes it much easier to remove the stuck injectors.

Q: On a scale of 1 to 10, how would you rate these tools overall? Why?

A:Probably a solid nine. It was very well made and fit well on the injectors so that it didn’t slide off. It was quick and easy to install. The added advantage of using the power and vibration of the air hammer to remove stubborn injectors is a big plus.
Filed in: Fuel Injector Puller, PMXPWP200PROP, Power Stroke
Previous article Diesel Tech Uses Bullit Tool to Fix Busted Bolt on Cummins ISX, Cutting Typical Repair Times in Half
Next article HOW TO MAKE A BROKEN BOLT REPAIR IN 25 MINUTES ON FLEET VEHICLES USING ADAPTABLE STUD REPAIR KIT

NEW AT PROMAXX

  • STC71000-12mm-14mm-hold-A-Rotor_Combo
    STC71000-12mm-hold-A-Rotor_in-use

    Hold-A-Rotor and Secure Disc Brake Rotors in Place on 12mm & 14mm Studded Hubs - STC71000

    Part#: STC71000
    $19.99 - $19.99
    $19.99
    $19.99 - $19.99
    $19.99

    $19.99 - $19.99
    $19.99
    $19.99 - $19.99
    $19.99
  • SAVE: 13% SAVE: %
    Mounting Ford F-150 Rear Axle Repair Kit
    FordF-150AxleRepairToolKit-PMXFRA500PRO

    Ford F-150 Rear Axle Repair Kit For 2021–2023 Trucks w/ Trailer Tow Max Duty Package & 9.75-inch Heavy-Duty Axle

    Part#: PMXFRA500PRO
    $399.95
    $399.95 - $399.95
    $399.95
    $349.95
    $349.95 - $349.95
    $349.95

    $399.95
    $399.95 - $399.95
    $399.95
    $349.95
    $349.95 - $349.95
    $349.95
    SAVE: 13% SAVE: %
  • Ford Explorer SAFETY RECALL 22S27-SB 204-594 Forcing Screw Replacement
    204-594 Forcing Screw Replacement

    Forcing Screw Alternative to Ford 2020-2022 Explorer Recall Special Service Tool part# 204-594 "Thunderbolt"

    Part#: PMX204-594
    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95

    $0.00 - $0.00
    $0.00
    $149.95
    $149.95 - $149.95
    $149.95
  • SAVE: 25% SAVE: %
    Fuel Injector Seal Puller (PMXISP200A)
    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller

    Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit

    Part#: PMXISPS200BSE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95

    Fuel Injector Seal Puller/Saver ProKit Part #: PMXISPS200PRO Introducing the cutting-edge Ford Power Stroke 6.7L Fuel Injector Copper Compression S...

    VIEW MORE
    $199.95
    $29.95 - $199.95
    $199.95
    $29.95 - $149.95
    $29.95 - $149.95
    $29.95
    SAVE: 25% SAVE: %
  • Ford-6.7L-Power-Stroke-EGR-Tube-Broken-Bolt-ProKit

    Ford 6.7L Power Stroke Diesel EGR Tube Broken Bolt Repair Kit - Nino

    Part#: PMXN200PRO
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95

    Nino EGR Tube ProKit Part #: PMXN200PRO 6.7L Ford Power Stroke Diesel Exhaust Gas Recirculation EGR Repair Kit - Nino The ProMAXX® EGR (Nino™) repa...

    VIEW MORE
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95 - $749.95
    $499.95

SHIPPING INFO

For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today
724-941-0941

Promaxx Tool Address

1121 Boyce Road
Suite #2000
Pittsburgh, PA 15241

Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.